Language :
Language :
YLH-5022 is a low molecular weight polyamide that can be used with different epoxy resins to obtain a cured product with good toughness and bonding properties.
YLH-5022 is a low molecular weight polyamide that can be used with different epoxy resins to obtain a cured product with good toughness and bonding properties. It is usually used in marine coatings, anticorrosive primers, middle coats, coal tar epoxy system coatings, adhesives, repair composite materials, and high-end coatings.
|
Item |
Specification |
|
Appearance |
Yellow liquid |
|
Color, G |
Max.10 |
|
Viscosity, cps@25°C |
30000-80000 |
|
AHEW, g/eq |
165-185 |
|
Amine value, mg KOH/g |
190-240 |
|
Solid Content, % |
Min. 95 |
Store in a cool, dry, ventilated place, sealed; avoid direct sunlight; isolate from fire and heat sources; unused products should be sealed.
At least 12 months from the date of manufacture in the original packing in ambient temperatures.
Drum package.
DMAPA, chemical name N,N-Dimethyl-1,3-propanediamine, CAS 109-55-7.
1,5-DIAMINOPENTANE, CAS 462-94-2.
Curing agent YLD-1240 (N,N,N',N'-TETRAKIS(OXIRANYLMETHYL)-1,3-BENZENEDIMETHANAMINE, CAS 63738-22-7)
DCHA, chemical name 1,2-Diaminocyclohexane, CAS 694-83-7.
Polyetheramine D-230 is a diamine based on a copolymer backbone with an average molecular weight of approximately 220, with the amino group located on the second carbon atom at the end of the polyether.
Polyetheramine M-2070 is a monoamine based on a copolymer host with an approximate molecular weight of 2000.
Polyetheramine D-2000 is a diamine based on a copolymer backbone with an average molecular weight of approximately 2000. And its amino group located on the second carbon atom at the end of the polyether.
Polyetheramine T-5000 is a trifunctional primary amine with an average molecular weight of approximately 5000.
Polyetheramine T-403 is a trifunctional primary amine with an average molecular weight of approximately 440.
Polyetheramine D-400 is a diamine based on a copolymer backbone with an average molecular weight of approximately 400, with the amino group located on the second carbon atom at the end of the polyether.
HMDA, chemical name 1,6-Hexanediamine, CAS 124-09-4.
MXDA, chemical name m-Xylylenediamine, CAS 1477-55-0.
YLH-6005 is a low viscosity epoxy hardener based on modified Polyetheramine with Nonyl phenol free, light color and fast curing speed.
YLH-3002 is a modified Cycloaliphatic amine epoxy hardener with light color, low odor and long potlife time.
YLH-3023 is Modified Cycloaliphatic amine base epoxy hardener in epoxy resin.
YLH-6004 is a low viscosity epoxy hardener based on modified Polyetheramine with Nonyl phenol free and low viscosity and long potlife.
YLH-9101 is an epoxy hardener based on modified cycloapliphatic amine with light color, low VOC and fast curing spped.
Diethyltoluenediamine also known as Diethylmethylbenzenediamine and DETDA CAS 68479-98-1.
PACM, chemical name 4,4'-Diaminodicyclohexyl methane, CAS 1761-71-3.
YLH-5101 is a polyamide epoxy curing agent with excellent comprehensive performance.
YLH-3101 is a low-viscosity curing agent modified by a special structure alicyclic amine, with good chemical resistance, high gloss and no oil surface.
1,3-BAC, chemical name 1,3-Cyclohexanebis(methylamine), CAS 2579-20-6.
1,5-PDA, chemical name 1,5-Pentanediamine, CAS 462-94-2.
MACM, chemical name3,3'-Dimethyl-4,4'-diaminodicyclohexylmethane, CAS 6864-37-5.
HTDA, chemical name 4-methyl-1,3'-cyclohexanediamine, CAS 13897-55-7.
DMTDA, chemical name Dimethyl thio-toluene diamine, CAS 106264-79-3.
DACH, chemical name 1,2-DIAMINOCYCLOHEXANE, CAS 6864-37-5.
YLH-5022 is a low molecular weight polyamide that can be used with different epoxy resins to obtain a cured product with good toughness and bonding properties.
MHHPA 3,4 methyl hexahydrophthalic anhydride, CAS 25550-51-0
IPv6 network supported
